Toyota Landcruiser Exhaust 76 Series Wagon 3" DPF Back Systems
10/2016 - 2025
More infoCalculate Shipping
Our store is in Sunbury, Victoria. For free local pick up please contact us first on 1300 12 13 12 so we can have your goods ready.
Toyota Landcruiser 76 Series Wagon 4.5L V8 3" DPF-Back Exhaust System
For Toyota Landcruiser 76 Series Wagon 4.5L V8 turbo diesel owners who want better flow and a deeper note while keeping the factory DPF in place. Built for the 1VD-FTV V8 - emissions compliance retained.
CNC mandrel-bent 3" pipework with thick laser-cut flanges. Bolt-on - no ECU remap or dyno tune required.
Product Specifications
- CNC mandrel-bent 3" (76mm) pipework
- Thick laser-cut flange plates
- Made in Australia
Available In
- Aluminised steel
- 409 grade stainless steel
Features
- Direct fit for Toyota 1VD-FTV 4.5L V8 turbo diesel
- DPF-back design retains the factory DPF
- Improved exhaust flow and throttle response
- Enhanced fuel economy and towing performance
- Deeper, more refined exhaust tone
- Bolt-on installation - no ECU remapping or dyno tune required
Choose Your Configuration
All configurations are DPF-back and retain the factory DPF:
- Hotdog
- Muffler
- Pipe
Fitment
- Vehicle: Toyota Landcruiser 76 Series Wagon
- Engine: 4.5L V8 turbo diesel, Toyota 1VD-FTV
- DPF status: DPF-equipped - this system retains the factory DPF
Warranty
Our 409 stainless steel and aluminised steel IGNITE Exhausts are backed by a 10 year warranty and 2 year Australian manufacturer warranty respectively.
Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.
Should the item you receive be faulty in any way, please contact us and we"ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.
Varies between selections.
| Brand | IGNITE Exhausts |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.390m |
| Shipping Height | 0.250m |
| Shipping Length | 1.300m |
| Shipping Cubic | 0.126750000m3 |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting and DPF pipe from the vehicle whilst also removing the O2 sensor.
- Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Screw in the O2 sensor and tighten.
- Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
- Enjoy your IGNITE exhaust!
Vehicle Applications
| Make | Model | Year Start - Year End | Series | Body Type | Engine Details | Drivetrain |
|---|---|---|---|---|---|---|
| Toyota | LandCruiser | 10/2016 - 2025 | J70,JL70 SUV 4.5 TD 32V 4x4 | SUV | 4.5L | Diesel | AWD |
