Toyota Landcruiser Exhaust 79 Series Single Cab 3", 3.5" & 4" Turbo Back & 4" to 3" Dual Exhausts Offroad Systems
10/2016 - 2025
More infoToyota Landcruiser 79 Series Single Cab 4.5L V8 3", 4" Turbo-Back & 4" to 3" Dual Off-Road Exhaust Systems
This is the full turbo-back, DPF-delete system for the Toyota Landcruiser 79 Series Single Cab 4.5L V8 turbo diesel - built for maximum flow, stronger throttle response and a deeper note. Available in 3", 4" single, or 4" to 3" dual layouts.
CNC mandrel-bent pipework with thick laser-cut flanges. Installation kit included.
Product Specifications
- CNC mandrel-bent 3" (76mm) and 4" (101.6mm) pipework
- Thick laser-cut flange plates
- Installation kit included
- Made in Australia
Available In
- Aluminised steel
- 409 grade stainless steel
Features
- Direct fit for Toyota 1VD-FTV 4.5L V8 turbo diesel
- Turbo-back off-road design for maximum exhaust flow
- Improved throttle response and reduced back pressure
- Deeper, more aggressive exhaust tone
- Bolt-on installation to factory mounting points
Choose Your Configuration
Cat-equipped:
- Cat & Muffler
- Cat & Hotdog
- Cat & Pipe Only
No cat:
- No Cat & Muffler
- No Cat & Hotdog
- No Cat & Pipe Only
Need to keep the factory DPF? See the DPF Back systems.
Fitment
- Vehicle: Toyota Landcruiser 79 Series Single Cab
- Engine: 4.5L V8 turbo diesel, Toyota 1VD-FTV
- DPF status: DPF-delete - this turbo-back system removes the factory DPF
These options are sold for off-road and racing use only. Please consider before making your purchase. Note: an ECU recalibration is required when deleting your DPF.
Warranty
Our 409 stainless steel and aluminised steel IGNITE Exhausts are backed by a 10 year warranty and 2 year Australian manufacturer warranty respectively.
Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.
Should the item you receive be faulty in any way, please contact us and we"ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.
| Brand | IGNITE Exhausts |
| Shipping Weight | 24.0000kg |
| Shipping Width | 0.330m |
| Shipping Height | 0.340m |
| Shipping Length | 1.350m |
| Shipping Cubic | 0.151470000m3 |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting and DPF pipe from the vehicle whilst also removing the O2 sensor.
- Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Screw in the O2 sensor and tighten.
- Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
- Enjoy your IGNITE exhaust!
Vehicle Applications
| Make | Model | Year Start - Year End | Series | Body Type | Engine Details | Drivetrain |
|---|---|---|---|---|---|---|
| Toyota | LandCruiser | 10/2016 - 2025 | Pickup 4.5 TD 32V 3.5t 4x4 | Pickup | 4.5L | Diesel | AWD |
| Toyota | LandCruiser | 10/2016 - 2025 | J70 Pickup 4.5 TD 32V 4x4 | Pickup | 4.5L | Diesel | AWD |
