Ignite/Playtime 3" (76mm) DPF Turbo Back Sports Exhaust System

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. They also give a better towing experience.

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. We use 3 inch aluminised steel tubing or upgrade to our 409 grade stainless steel options, thick cut laser plates to ensure maximum durability, and maximum satisfaction with your upgrade!

The DPF exhaust for the 4.5L V8 Toyota Landcruiser (76 Series, wagon) are available in these configurations:

  • Hotdog
  • Muffler
  • Pipe

Varies between selections.

SKU tland76DPF
Brand Ignite

2 Year Warranty.

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

All of our products are fully backed by Australian manufacturer warranty. 

  1. Remove rear tail pipe and muffler assembly from the vehicle.   
  2. Remove centre connecting and DPF pipe from the vehicle whilst also removing the O2 sensor.
  3. Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  4. Screw in the O2 sensor and tighten.
  5. Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  6. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  8. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  9. Enjoy your IGNITE exhaust!

Related Products