HIGHTEC ATF 9006 is an low-viscosity, high-performance ATF based on the most advanced additives and specially selected HC synthetic oils. It has been specially designed to meet the requirements of modern ‘stepped’ automatic transmissions in sport utility (SUV), mid-size and luxury vehicles.

Application:

HIGHTEC ATF 9006 has been adapted to the special requirements of modern ‘stepped’ automatic transmissions that are installed in high-performance vehicles from the upper mid-range and luxury class, but also in SUV. Its high friction coefficient level ensures the slip-free transmission of high torques, thus making spontaneous and sporty shifting operations possible. HIGHTEC ATF 9006 is therefore especially recommended for vehicles that are often driven at a quick pace and at full power. Its excellent friction coefficient stability guarantees consistently good shifting performance over the entire service interval.

This product is also recommended when the following filling instructions are required:

• Aisin Warner AW-1

• BMW 83 22 0 142 516 (BMW 1375.4)/83 22 2 305 396 (BMW ATF 2)/83 22 2 355 599 (BMW ATF 6)

• Dexron HP Ford WSS-M2C938-A/XT-6-QSP/XT-10-QLV

• GM 1940773

• Honda/Acura ATF Type 3.0/08200-9016-A

• Honda DW-1

• Hyundai/Kia Red-1K/SP-IV/SP-IV-M/SP-IV-RR/040000C90SG

• Isuzu SCS/WSI

• Jaguar Fluid 8432

• Land Rover TYK500050

• Mazda FZ MB 236.12/236.14

• MERCON SP/LV

• Mitsubishi Dia Queen ATF-PA/4030401/ATF-MA1/MZ320775

• Nissan Matic R/S

• SSANG YONG

• Toyota Type WS (JWS 3324)

• Volvo 6 speed MY 2011-2013 (P/N 31256774/31256675)

• VW G 055 005

• ZF S671 090 255 / ZF S671 090 281

Advantages:

• Adapted friction coefficient behaviour for spontaneous and sporty shifting operations

• Prevention of friction vibrations in a reliable manner

• Excellent friction coefficient stability over the entire service interval

• Reduced viscosity for better fuel efficiency

• Excellent shifting characteristics at low temperatures

• The best wear protection properties for reliable operation and the longest service life

• Outstanding ageing and oxidation stability

• Minimal tendency to foam

• Reliable protection against corrosion, wear, sludge accumulation and adhesion

• Neutral behaviour towards gasket materials

• Miscible and compatible with other ATF. However, in order to exploit the full product benefits of HIGHTEC ATF 9006, a complete transmission fluid change is strongly recommended.

Notes:

HIGHTEC ATF 9006 is not suitable for use in DCT/DSG (dualclutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.