Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. Not only are they more durable as well, there's no need for retuning the ECU or a dyno run. They also give a better towing experience.

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno.Our systems are CNC mandrel bent, 3 inch aluminised steel tubing or upgrade to our 409 grade stainless steel options, 10mm thick cut laser plates & EGT Pyrometer fittings to ensure maximum durability, and maximum satisfaction with your upgrade!

Designed to improve the performance of the Ford Duratorq TDCi (ZSD-422) 4 cylinder diesel engine.

The exhaust system for the 2.2L Turbo Diesel Ford PX Ranger (2011 - 2016) are available in these configurations:

  • No Cat / Hotdog
  • No Cat / Muffler
  • No Cat / Pipe
  • Cat / Hotdog
  • Cat / Muffler
  • Cat / Pipe
  • Diff Pipe

Suits:

Single / Dual Cab / Extra Cab

Varies between options.

SKU 2.2pxrangerignite
Brand Ignite
Shipping Weight 20.0000kg
Shipping Width 0.250m
Shipping Height 0.390m
Shipping Length 1.130m
Shipping Cubic 0.110175000m3

2 Year Warranty.

All of our products are fully backed by Australian manufacturer warranty. 

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

  1. Remove rear tail pipe and muffler assembly from the vehicle.   
  2. Remove centre connecting pipe from the vehicle.
  3. Remove turbo dump pipe heat shield.
  4. Remove catalytic converter from vehicle. Hint: Access lower turbo nut through the RHS wheel arch.
  5. Remove turbo nuts/bolts and replace with providing studs M10x1.5, nuts M10x1.5. Some will need two replaced as some may only need one replaced.
  6. Insert the supplied EGT plug into the turbo dump pipe.     
  7. Fit the turbo dump pipe to the turbo outlet flange using the three supplied M10x1.5 nuts. Tighten all 3 nuts.
  8. Fit the connecting pipe to the to the turbo dump pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  9. Fit the second connecting pipe to first connecting pipe with the integrated hanger mount aligning with the rubber hanger located on the side of the chassis, tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 12)
  11. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  12. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  13. Enjoy your IGNITE exhaust!

Related Products