Nissan D40 Navara Exhaust 2.5L Manual Turbo Back 3" No Cat With Muffler Black Aluminised Steel
2007 - 2015
Share this product:
PRODUCT DETAILS:
Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Coated
Fits:
NISSAN NAVARA D40 2.5L YD25DDTi 4CYL TURBO
SINGLE / DUAL CAB UTE
2007 TILL 2015
MANUAL GEARBOX
NON DPF MODEL ONLY
FITS: SPANISH AND THAI BUILT
Features:
CNC 3" Mandrel Bent
Durable 3” Aluminised Steel Tube
10mm Thick Laser Cut Flange Plates.
Exhaust Temp Provision (EGT)
Cat Eliminator Pipe
High Flow Sports Muffler
Fitting Kit included
2 Year Manufacturer Warranty
MADE IN AUSTRALIA
Benefits:
Increased Performance and Fuel Economy
Extreme durability
Will not require ECU remapping or dyno tune
Optional Direct Fit Muffler, Resonator, or Pipe
Available for over 50 makes and models
Ultimate towing advantage
Quick and easy install
Australian Made
2 year warranty
*** Performance and Economy gains can vary for each vehicle***
***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***SKU | ND40BCDM |
Brand | Ignite |
Shipping Weight | 24.0000kg |
Shipping Width | 0.350m |
Shipping Height | 0.340m |
Shipping Length | 1.350m |
Shipping Cubic | 0.160650000m3 |
Unit Of Measure | ea |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting pipe from the vehicle.
- Remove flex join pipe from the vehicle.
- Remove turbo dump pipe heat shields.
- Remove gear box bracket.
- Remove turbo dump pipe. We advise to spray the 3 nuts with WD40 before removing.
- Insert the supplied EGT plug into the turbo dump pipe.
- Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the three supplied M10x1.25 nuts. Re fit gear box bracket at the same time and then tighten all 4 nuts/bolts.
- Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the connecting pipe to the flex pipe (the larger degree bend will connect onto the flex pipe) and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
- Enjoy your IGNITE exhaust!