Mitsubishi MQ Triton Exhaust 2.4L 3" Turbo Back Offroad 4x4 Systems
2015 - 2018
More infoCalculate Shipping
Our store is in Sunbury, Victoria. For free local pick up please contact us first on 1300 12 13 12 so we can have your goods ready.
Mitsubishi MQ Triton 2.4L 3" Turbo-Back Off-Road Exhaust System
This is the full turbo-back, DPF-delete system for the Mitsubishi MQ Triton 2.4L turbo diesel - built for maximum flow, stronger throttle response and a deeper note. Engineered for the 4N15 MIVEC inline 4-cylinder diesel from the turbo back, with the factory DPF removed.
CNC mandrel-bent 3" pipework, 10mm laser-cut flanges, and an installation kit included.
Product Specifications
- CNC mandrel-bent 3" (76mm) pipework
- 10mm thick laser-cut flange plates
- Installation kit included
- Made in Australia
Available In
- Aluminised steel
- 409 grade stainless steel
Features
- Direct fit for Mitsubishi 4N15 MIVEC inline 4-cylinder diesel engine
- Turbo-back off-road design for maximum exhaust flow
- Improved throttle response and reduced back pressure
- Deeper, more aggressive exhaust tone
- Bolt-on installation to factory mounting points
Choose Your Configuration
Cat-equipped:
- Cat & Muffler
- Cat & Resonator
- Cat & Pipe Only
No cat:
- No Cat & Muffler
- No Cat & Hotdog
- No Cat & Pipe Only
Need to keep the factory DPF? See the DPF-Back Exhaust.
Fitment
- Vehicle: Mitsubishi MQ Triton
- Engine: 2.4L turbo diesel, Mitsubishi 4N15 MIVEC inline 4-cylinder
- DPF status: DPF-delete - this turbo-back system removes the factory DPF
These options are sold for off-road and racing use only. Please consider before making your purchase. Note: an ECU recalibration is required when deleting your DPF.
Warranty
Our 409 stainless steel and aluminised steel IGNITE Exhausts are backed by a 10 year warranty and 2 year Australian manufacturer warranty respectively.
Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.
Should the item you receive be faulty in any way, please contact us and we"ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.
| Brand | IGNITE Exhausts |
| Shipping Weight | 24.0000kg |
| Shipping Width | 0.390m |
| Shipping Height | 0.250m |
| Shipping Length | 1.300m |
| Shipping Cubic | 0.126750000m3 |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting and DPF pipe from the vehicle.
- Fit the DPF pipe to the DPF flange using the factory spring loaded bolts.
- Fit the connecting pipe section to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
- Enjoy your IGNITE exhaust!
Vehicle Applications
| Make | Model | Year Start - Year End | Series | Body Type | Engine Details | Drivetrain |
|---|---|---|---|---|---|---|
| Mitsubishi | Triton | 2015 - 2025 | MQ,MR Ute 2.4 DI-D | Ute | 2.4L | Diesel | RWD |
| Mitsubishi | Triton | 2015 - 2025 | MQ,MR Ute 2.4 DI-D 4WD | Ute | 2.4L | Diesel | AWD |
| Mitsubishi | Triton | 2015 - 2025 | MQ,MR Ute 2.4 DI-D 4WD | Ute | 2.4L | Diesel | AWD |
