Toyota Landcruiser Exhaust 79 series DPF Back 4" Side Exit Stainless Steel

PRODUCT DETAILS:

Ignite Exhausts 4 (101.6mm) DPF Back Side Exit Exhaust System

Fits:

TOYOTA LANDCRUISER 79 SERIES 4.5L V8

DUAL CAB UTE ONLY

2017 Onwards

DPF MODEL ONLY

Features:

Durable 4" Stainless Steel Tube & Bends

V-Band Connection

Tig Welded

Fitting Kit included

2 Year Manufacturer Warranty

MADE IN AUSTRALIA

Benefits:

Increased Performance and Sound

Extreme durability

Will not require ECU remapping or dyno tune

Quick and easy install

***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***

Barcode #	9361952007228
Brand	Ignite Exhausts
Shipping Weight	20.0000kg
Shipping Width	0.350m
Shipping Height	0.250m
Shipping Length	0.900m
Shipping Cubic	0.078750000m3
Unit Of Measure	ea
Year	2017 - 2025

5 Year Warranty.

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

All of our products are fully backed by Australian manufacturer warranty.

Fitting Instructions – IGNITE 4” DPF-Back Side Exit Exhaust System
Vehicle Application: Toyota Land Cruiser 79 Series

Before You Begin:
Ensure the vehicle is securely parked on a flat surface and safely supported. Always allow the exhaust system to cool down before commencing removal or installation.

Installation Steps

Remove the Factory Exhaust Components
- Detach the factory tailpipe and rear muffler assembly.
- Remove the factory connecting pipe and the DPF connecting pipe.
- Disconnect the O2 sensor plug.
Transfer the O2 Sensor
- Carefully unscrew the O2 sensor from the factory exhaust.
- Reinstall the O2 sensor into the new IGNITE DPF connecting pipe.
Install Rear Rubber Mount
- Fit the supplied rubber mount to the bracket located on the rear side-exit exhaust section.
- Leave the mount finger-tight at this stage.
- Refer to Image 1 for correct strap folding orientation.
Install Rear Section First
- Begin installation with the rear section, which mounts over the chassis.
- Align the bolt from the rubber mount into the designated hole on the crossmember.
- Refer to Image 2 for guidance.
- Secure the bolt finger-tight only at this stage.
Fit the DPF Connecting Pipe
- Connect the DPF pipe to the back of the DPF using the original factory spring bolts.
- Tighten only finger-tight for now.
Secure Factory Rubber Mount
- Position the supplied rectangular stainless steel plate over the factory rubber mount.
- Reuse the two factory nuts to secure the plate.
Join Sections with V-Band Clamp
- Use the V-Band clamp to join the rear section and DPF connecting pipe.
- Tighten the clamp until the connection is snug but still allows minor adjustment.
Check Clearances
- Inspect the entire system for adequate clearance around chassis components, suspension, and bodywork.
- If necessary, insert temporary spacers where the exhaust is close to nearby surfaces.
Final Tightening Sequence
- Starting from the front of the vehicle, progressively tighten all fittings and fasteners toward the rear.
- Remove any temporary spacers once everything is secure.
Final Check and Test Drive

Double-check all bolts and clamps for tightness.
Reconnect the O2 sensor plug.
Start the vehicle and listen for leaks or abnormal noises.
Take the vehicle for a test drive to experience the enhanced V8 sound of your new IGNITE exhaust system.

Installation Complete
Enjoy your new IGNITE 4” DPF-Back Side Exit Exhaust System and the improved performance and sound it brings to your Toyota Land Cruiser 79 Series.

Image 1

Image 2

MANDREL BENT EXHAUST

IGNITE Exhausts consists of mandrel bent piping to determine optimum performance, flow and sound out of your exhaust system. Mandrel bending involves a mandrel placed in the tube during bending which maintains the shape and diameter of the tube. It reduces the risks of restricted exhaust gases often found in cheaper bending methods like press bending.

AUSTRALIAN DESIGNED AND MADE

With over 50 years combined experience the Playtime team have spent countless hours on the design and testing of our 3 inch mandrel bent 4x4 exhaust systems. Proudly Australian made here in Sunbury, Victoria, we strive to offer an affordable product direct to the public.

WHICH OPTION DO I NEED?

IGNITE Exhausts pride themselves in offering an extensive number of exhaust options to suit every buyer.

High flow catalytic converter – Required for legal road use, designed to have less restriction compared to stock catalytic converters, high flow design has very little restriction on the exhaust.

No catalytic converter – For off-road use only, no restriction in the exhaust (complete straight through exhaust).

Pipe only – No mufflers (straight pipe) our loud option.

Resonator – Moderate sound option, the design of our stainless steel resonator helps reduce drone whilst still providing an aggressive exhaust note.

Muffler – Our quietest option, perfect for towing. The straight through design of our stainless steel mufflers insure no restriction to the exhaust whilst keeping the note minimal.

Diff pipe – No mufflers (straight pipe) our loudest option finishing before the vehicles differential.

ALUMINISED MILD STEEL

Aluminised mild steel commonly used in exhaust systems for its strength and heat resistance is a great option for when choosing your exhaust. It can withstand exposure to corrosive elements without rusting easily thanks to its aluminium coating.

It’s a cost effective option compared to other similar materials making it a popular choice in various industries. If you’re looking for a heat resistant, durable, cost effective exhaust an aluminised mild steel exhaust is your option.

409 GRADE STAINLESS STEEL

The premium when it comes to an exhaust system is a 409 grade stainless steel exhaust. Unlike other materials such as 304 stainless steel that is very susceptible to cracking, 409 grade is a very heat resistant and more versatile metal making it a great choice when looking for exhaust performance.

Other materials like 304 stainless steel stress under the constant heat transfer in an exhaust which most commonly results in the exhaust cracking. 304 stainless steel is a great option for show cars where you are after that great polished look but on everyday road use the failure rate is high.

For a durable, corrosion and heat resistant exhaust it’s no mystery why a 409 stainless steel is used on most factory produced vehicles making it the best option when it comes to a 4x4 exhaust.

LASER CUT FLANGES & HANGERS

IGNITE Exhausts have spared no time when it comes to the custom flanges & hangers used on their exhaust systems giving it the upper edge when it comes to the strength of the exhaust.

Our competitors most often use the typical steel-rod hanger bracket creating a vast weak spot over the bracket, which in some instances can cause a crack or failure in the exhaust.

The precise cut of our hangers ensure that the bracket fits perfectly and securely. This accuracy helps maintain the structural integrity of the exhaust system.

BOLT ON INSTALLATION

IGNITE Exhausts are designed and tested to follow the same layout as the factory exhaust. A priority of ours is to ensure the ease of bolting on our exhaust systems which utilise the factory rubber mounts.

Detailed fitting instructions available at the click of a button as well as a full fitting kit supplied makes the job a breeze. Nuts, bolts, clamps, gaskets etc all supplied in fitting kit.

Note: When fitting allow time to check over the exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.

WARRANTY

Our 409 stainless steel and aluminised steel IGNITE Exhausts are backed by a 5 year warranty and 2 year warranty respectively. Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

***Disclaimer: Please consider aftermarket accessories such as long-range fuel tanks, upgraded suspension and larger spare tyres before ordering your exhaust. To confirm your vehicle is compatible contact us via message/email or on 1300 12 13 12.***