Toyota Hilux Exhaust 3L D4D 3" Turbo Back Exhaust Cat & Muffler Black Aluminised Steel
KUN Series
Make 4 payments of $161.25 over 8 weeks and get it now!
Share this product:
PRODUCT DETAILS:
Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Coated
Fits:
TOYOTA HILUX D4D 3.0L 1KD-FTV TURBO
SINGLE / DUAL CAB KUN26 SERIES UTE
2005 TILL 2015
NON DPF MODEL ONLY
Features:
CNC 3" Mandrel Bent
Durable 3” Aluminised Steel Tube
10mm Thick Laser Cut Flange Plates.
Exhaust Temp Provision (EGT)
High Flow Metallic Cat Converter
High Flow Stainless Steel Sports Muffler
Fitting Kit included
2 Year Manufacturer Warranty
MADE IN AUSTRALIA
Benefits:
Increased Performance and Fuel Economy
Extreme durability
Will not require ECU remapping or dyno tune
Optional Direct Fit Muffler, Resonator, or Pipe
Available for over 50 makes and models
Ultimate towing advantage
Quick and easy install
*** Performance and Economy gains can vary for each vehicle***
***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***
SKU | THI3BCM |
Brand | Ignite |
Shipping Weight | 24.0000kg |
Shipping Width | 0.390m |
Shipping Height | 0.250m |
Shipping Length | 1.130m |
Shipping Cubic | 0.110175000m3 |
Unit Of Measure | ea |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting pipe from the vehicle.
- Remove catalytic converter from the vehicle.
- Remove turbo dump. We advise to spray the 3 nuts with WD40 before removing. Hint: It is easier to locate the turbo nuts from underneath the car using a 12mm spanner or single hex socket for the top turbo nut.
- Insert the supplied EGT plug into the turbo dump pipe.
- Fit the turbo dump pipe to the turbo outlet flange using the three supplied M8x1.25 nuts. Tighten all 3 nuts.
- Fit the cat/cat delete flex pipe to the to the turbo dump pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the connecting pipe to the cat/cat delete flex pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 11)
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
- Enjoy your IGNITE exhaust!