PRODUCT DETAILS: 

Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Painted

 

Fits:

TOYOTA LANDCRUISER 79 SERIES 4.5L 1VD-FTV SINGLE TURBO

SINGLE CAB UTE ONLY

2007 TILL 2017

NON DPF MODEL ONLY

 

Features:

CNC 3" Mandrel Bent

Durable 3” Aluminised Steel Tube

10mm Thick Laser Cut Flange Plates.

Exhaust Temp Provision (EGT)

High Flow Metallic Cat Converter

Side Exit Pipe

Fitting Kit included

2 Year Manufacturer Warranty

MADE IN AUSTRALIA

 

Benefits:

Increased Performance and Fuel Economy 

Extreme durability

Will not require ECU remapping or dyno tune

Optional Direct Fit Muffler, Resonator, or Pipe

Available for over 50 makes and models

Ultimate towing advantage

Quick and easy install

 

***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***

SKU T79S45BCSE
Brand Ignite
Shipping Weight 24.0000kg
Shipping Width 0.390m
Shipping Height 0.250m
Shipping Length 1.130m
Shipping Cubic 0.110175000m3
Unit Of Measure ea
  1. Remove rear tail pipe and muffler assembly from the vehicle. 
  2. Remove centre connecting pipe from the vehicle.  
  3. Remove turbo dump catalytic converter from the vehicle. We advise to spray the 3 nuts with WD40 before removing. Hint: It is sometimes easier to locate the LHS turbo nut through the LHS wheel arch.
  4. Insert the supplied EGT plug into the turbo dump pipe.
  5. Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the three supplied M10x1.25 nuts. Insert the standard gear box bracket bolt also. Tighten all 4 nuts/bolts.
  6. Fit the connecting pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Fit the over chassis connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  8. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  9. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  10. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
  11. Enjoy your IGNITE exhaust!