Playtime Ignite 3" (76mm) DPF & Turbo Back Sports Exhaust System

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. They also give a better towing experience.

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. We use 3 inch aluminised steel tubing or upgrade to our 409 grade stainless steel options, thick cut laser plates to ensure maximum durability, and maximum satisfaction with your upgrade!

The DPF exhaust for the 4.5L V8 Toyota Landcruiser (79 Series, single cab) are available in these configurations:

  • Hotdog
  • Muffler
  • Pipe

Turbo Back (DPF Delete) exhaust system options:

  • No Cat & Muffler
  • No Cat & Hotdog
  • No Cat & Pipe Only

 

THESE OPTIONS ARE SOLD FOR OFFROAD AND RACING USE ONLY. PLEASE CONSIDER BEFORE MAKING YOUR PURCHASE

 

Note: An ECU Recalibration is required when deleting your DPF.

SKU tland79sdpf
Brand Ignite
  1. Remove rear tail pipe and muffler assembly from the vehicle.  
  2. Remove centre connecting and DPF pipe from the vehicle whilst also removing the O2 sensor.
  3. Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  4. Screw in the O2 sensor and tighten.
  5. Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  6. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  8. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  9. Enjoy your IGNITE exhaust!

Related Products