PRODUCT DETAILS: 

Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Painted

 

Fits:

TOYOTA HILUX D4D 3.0L 1KD-FTV TURBO

SINGLE / DUAL CAB KUN26 SERIES UTE

2005 TILL 2015

NON DPF MODEL ONLY

 

Features:

CNC 3" Mandrel Bent

Durable 3” Aluminised Steel Tube

10mm Thick Laser Cut Flange Plates.

Exhaust Temp Provision (EGT)

High Flow Metallic Cat Converter

Sports Muffler Delete Pipe

Fitting Kit included

2 Year Manufacturer Warranty

MADE IN AUSTRALIA

 

Benefits:

Increased Performance and Fuel Economy 

Extreme durability

Will not require ECU remapping or dyno tune

Optional Direct Fit Muffler, Resonator, or Pipe

Available for over 50 makes and models

Ultimate towing advantage

Quick and easy install

*** Performance and Economy gains can vary for each vehicle***

 

 

***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***

SKU THI3BCP
Brand Ignite
Shipping Weight 24.0000kg
Shipping Width 0.390m
Shipping Height 0.250m
Shipping Length 1.130m
Shipping Cubic 0.110175000m3
Unit Of Measure ea
  1. Remove rear tail pipe and muffler assembly from the vehicle.    
  2. Remove centre connecting pipe from the vehicle.  
  3. Remove catalytic converter from the vehicle.
  4. Remove turbo dump. We advise to spray the 3 nuts with WD40 before removing. Hint: It is easier to locate the turbo nuts from underneath the car using a 12mm spanner or single hex socket for the top turbo nut.
  5. Insert the supplied EGT plug into the turbo dump pipe.
  6. Fit the turbo dump pipe to the turbo outlet flange using the three supplied M8x1.25 nuts. Tighten all 3 nuts.
  7. Fit the cat/cat delete flex pipe to the to the turbo dump pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  8. Fit the connecting pipe to the cat/cat delete flex pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 11)
  9. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  11. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
  12. Enjoy your IGNITE exhaust!