PRODUCT DETAILS: 

 

Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Painted

 

Fits:

NISSAN NAVARA D40 2.5L YD25DDTi 4CYL TURBO

SINGLE / DUAL CAB UTE

2007 TILL 2015

MANUAL GEARBOX

NON DPF MODEL ONLY

 

FITS: SPANISH AND THAI BUILT

 

Features:

CNC 3" Mandrel Bent

Durable 3” Aluminised Steel Tube

10mm Thick Laser Cut Flange Plates.

Exhaust Temp Provision (EGT)

High Flow Metallic Cat Converter

High Flow Sports Muffler

Fitting Kit included

2 Year Manufacturer Warranty

MADE IN AUSTRALIA

 

Benefits:

Increased Performance and Fuel Economy 

Extreme durability

Will not require ECU remapping or dyno tune

Optional Direct Fit Muffler, Resonator, or Pipe

Available for over 50 makes and models

Ultimate towing advantage

Quick and easy install

*** Performance and Economy gains can vary for each vehicle***

***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***

SKU ND40BCM
Brand Ignite
Shipping Weight 24.0000kg
Shipping Width 0.350m
Shipping Height 0.340m
Shipping Length 1.350m
Shipping Cubic 0.160650000m3
Unit Of Measure ea
  1. Remove rear tail pipe and muffler assembly from the vehicle.
  2. Remove centre connecting pipe from the vehicle.  
  3. Remove flex join pipe from the vehicle.
  4. Remove turbo dump pipe heat shields.
  5. Remove gear box bracket.
  6. Remove turbo dump pipe. We advise to spray the 3 nuts with WD40 before removing.
  7. Insert the supplied EGT plug into the turbo dump pipe.
  8. Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the three supplied M10x1.25 nuts. Re fit gear box bracket at the same time and then tighten all 4 nuts/bolts.
  9. Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the connecting pipe to the flex pipe (the larger degree bend will connect onto the flex pipe) and tighten finger tight with the supplied 3/8 UNC nuts.
  11. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  12. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  13. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
  14. Enjoy your IGNITE exhaust!