PRODUCT DETAILS: 

 

Playtime Ignite 3" (76mm) Dump Pipe Back Sports Exhaust System - Black Painted

 

Fits:

NISSAN PATROL 4.2L TD42T TURBO

GU SERIES WAGON

1999 TILL 2015

FACTORY TURBO ONLY (Retains factory dump pipe)

 

Features:

CNC 3" Mandrel Bent

Durable 3” Aluminised Steel Tube

10mm Thick Laser Cut Flange Plates.

High Flow Sports Resonator

Fitting Kit included

2 Year Manufacturer Warranty

MADE IN AUSTRALIA

 

Benefits:

Increased Performance and Fuel Economy 

Extreme durability

Will not require ECU remapping or dyno tune

Optional Direct Fit Muffler, Resonator, or Pipe

Available for over 50 makes and models

Ultimate towing advantage

Quick and easy install

 

 

***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***

SKU NGUW42BHD
Brand Ignite
Shipping Weight 24.0000kg
Shipping Width 0.330m
Shipping Height 0.340m
Shipping Length 1.350m
Shipping Cubic 0.151470000m3
Unit Of Measure ea
  1. Remove rear tail pipe and muffler assembly from the vehicle.   
  2. Remove centre connecting flex pipe and gear box bracket from the vehicle.
  3. If you purchased our dump pipe back system continue with step 8. 
  4. Remove turbo dump pipe heat shield.
  5. Remove turbo dump pipe. We advise to spray the 6 nuts with WD40 before removing.
  6. Insert the supplied EGT plug into the turbo dump pipe.
  7.  Fit the turbo dump pipe and tighten all six nuts.
  8. Fit the front pipe section to the dump pipe and tighten finger tight with the supplied 3/8 UNC nuts.    
  9. Fit the flex join pipe to the front pipe section with the longer side of the flex pipe going towards the front of the vehicle and then tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the pipe only/resonator or muffler section to the flex pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  11.  GU ute centre rubber mount section may need to be replaced with the supplied rubber mount.
  12. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  13. GU ute rear rubber mount section may need to be replaced with the supplied rubber mount also.
  14. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
  15. Enjoy your IGNITE exhaust!