Isuzu D-Max Exhaust 3L 3" Turbo Back Cat & Muffler Black Aluminised Steel
2012 - 2016
Make 4 payments of $175.00 over 8 weeks and get it now!
Share this product:
PRODUCT DETAILS:
Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Coated
Fits:
ISUZU DMAX 3.0L 4JJ1 SINGLE TURBO
SINGLE / DUAL CAB UTE
2012 TILL 2017
NON DPF MODEL ONLY
Features:
CNC 3" Mandrel Bent
Durable 3” Aluminised Steel Tube
10mm Thick Laser Cut Flange Plates.
Exhaust Temp Provision (EGT)
High Flow Metallic Cat Converter
High Flow Sports Muffler
Heat Resistant Black Paint
Fitting Kit included
2 Year Manufacturer Warranty
MADE IN AUSTRALIA
Benefits:
Increased Performance and Fuel Economy
Extreme durability
Will not require ECU remapping or dyno tune
Optional Direct Fit Muffler, Resonator, or Pipe
Available for over 50 makes and models
Ultimate towing advantage
Quick and easy install
***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***
SKU | IDMAX3BCM |
Brand | Ignite |
Shipping Weight | 24.0000kg |
Shipping Width | 0.390m |
Shipping Height | 0.250m |
Shipping Length | 1.300m |
Shipping Cubic | 0.126750000m3 |
Unit Of Measure | ea |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting pipe from the vehicle.
- Remove flex join pipe from the vehicle.
- Remove turbo dump pipe heat shield.
- Remove gear box bracket.
- Remove turbo dump pipe. We advise to spray the 2 nuts and 2 bolts with WD40 before removing. Hint: Removing the cat section be a pain, if you wish to not keep the standard exhaust, we advise to cut the bottom flange off the cat section to help with removal.
- Insert the supplied EGT plug into the turbo dump pipe.
- Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the four supplied M8x1.25 nuts and two M8x1.25 studs. Tighten all 4 nuts.
- Re fit gear box bracket.
- Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the connecting pipe to the flex pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
- Enjoy your IGNITE exhaust!