Holden RG Colorado Exhaust 2.8L 3" Turbo Back Cat & Pipe Black Aluminised Steel
2012 - 2016
Make 4 payments of $152.50 over 8 weeks and get it now!
Share this product:
PRODUCT DETAILS:
Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System - Black Coated
Fits:
HOLDEN COLORADO RG 2.8L DURAMAX SINGLE TURBO
SINGLE / DUAL CAB UTE
2012 TILL 2017
NON DPF MODEL ONLY
Features:
CNC 3" Mandrel Bent
Durable 3” Aluminised Steel Tube
10mm Thick Laser Cut Flange Plates.
Exhaust Temp Provision (EGT)
High Flow Metallic Cat Converter
Sports Muffler Delete Pipe
Fitting Kit included
2 Year Manufacturer Warranty
MADE IN AUSTRALIA
Benefits:
Increased Performance and Fuel Economy
Extreme durability
Will not require ECU remapping or dyno tune
Optional Direct Fit Muffler, Resonator, or Pipe
Available for over 50 makes and models
Ultimate towing advantage
Quick and easy install
***Disclaimer: Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call us as soon as possible to avoid damaging the exhaust system.***
SKU | HRG28BCP |
Brand | Ignite |
Shipping Weight | 24.0000kg |
Shipping Width | 0.390m |
Shipping Height | 0.250m |
Shipping Length | 1.300m |
Shipping Cubic | 0.126750000m3 |
Unit Of Measure | ea |
- Remove rear tail pipe and muffler assembly from the vehicle.
- Remove centre connecting pipe from the vehicle.
- Remove flex join pipe from the vehicle.
- Remove turbo dump pipe heat shield.
- Remove gear box bracket.
- Remove turbo dump pipe. We advise to spray the 4 nuts with WD40 before removing.
- Insert the supplied EGT plug into the turbo dump pipe.
- Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the four supplied M8x1.25 nuts. Re fit gear box bracket at the same time and then tighten all 4 nuts.
- Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the connecting pipe to the flex pipe and tighten finger tight with the supplied 3/8 UNC nuts.
- Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 13)
- Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
- Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle.
- Enjoy your IGNITE exhaust!