Playtime 3" (76mm) Turbo Back Sports Exhaust System

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. They also give a better towing experience.

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. We use aluminised steel tubing or upgrade to our 409 grade stainless steel options, thick cut laser plates & EGT Pyrometer fittings to ensure maximum durability, and maximum satisfaction with your upgrade!

The exhaust system for the 3L 1KD-FTV Toyota Hilux (2005 - 2015, KUN Series) are available in these configurations:

  • No Cat / Hotdog
  • No Cat / Stainless Steel Muffler
  • No Cat / Pipe
  • No Cat / Diff Pipe
  • Cat / Hotdog
  • Cat / Stainless Steel Muffler
  • Cat / Pipe
  • Cat / Diff Pipe

For both single & dual cab models.

Varies between options.

SKU thilux3d4d
Brand Ignite

2 Year Warranty.

All of our products are fully backed by Australian manufacturer warranty. 

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

  1. Remove rear tail pipe and muffler assembly from the vehicle.    
  2. Remove centre connecting pipe from the vehicle.  
  3. Remove catalytic converter from the vehicle.
  4. Remove turbo dump. We advise to spray the 3 nuts with WD40 before removing. Hint: It is easier to locate the turbo nuts from underneath the car using a 12mm spanner or single hex socket for the top turbo nut.
  5. Insert the supplied EGT plug into the turbo dump pipe.
  6. Fit the turbo dump pipe to the turbo outlet flange using the three supplied M8x1.25 nuts. Tighten all 3 nuts.
  7. Fit the cat/cat delete flex pipe to the to the turbo dump pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  8. Fit the connecting pipe to the cat/cat delete flex pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 11)
  9. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  11. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  12. Enjoy your IGNITE exhaust!

Related Products