Playtime Ignite 3" (76mm) Turbo Back Sports Exhaust System

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. Our systems are CNC mandrel bent, using 3 inch aluminised steel tubing or upgrade to our 409 grade stainless steel options, 10mm thick cut laser plates & EGT Pyrometer fittings to ensure maximum durability, and maximum satisfaction with your upgrade!

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. Not only are they more durable as well, there's no need for retuning the ECU or a dyno run. They also give a better towing experience.

Designed to improve the performance of Nissan's 3L  ZD30DDTi (ZD30) Inline 4 cylinder diesel engine.

The exhaust system for the 3L Nissan GU Patrol Turbo Diesel (1999 - 2015, leaf spring ute) are available in these configurations:

  • No Cat / Hotdog
  • No Cat / Muffler
  • No Cat / Pipe
  • Cat / Hotdog
  • Cat / Muffler
  • Cat / Pipe

Depends on selection.

SKU gupatrolleafs3
Brand Ignite

2 Year Warranty.

All of our products are fully backed by Australian manufacturer warranty. 

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

  1. Remove rear tail pipe and muffler assembly from the vehicle.
  2. Remove centre connecting flex pipe and gear box bracket from the vehicle.
  3. Remove gear box bolt supporting the turbo dump pipe.
  4. Remove turbo dump pipe heat shield.
  5. Remove turbo dump pipe. We advise to spray the 3 nuts with WD40 before removing.
  6. Insert the supplied EGT plug into the turbo dump pipe.
  7. Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the three supplied M8x1.25 nuts. Re fit gear box bolt at the same time and then tighten all 4 nuts/bolts.
  8. Fit the flex join pipe to the turbo dump pipe cat/cat delete section with the longer side of the flex pipe going towards the front of the vehicle and then tighten finger tight with the supplied 3/8 UNC nuts.
  9. Fit the pipe only/resonator or muffler section to the flex pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  10. GU ute centre rubber mount section may need to be replaced with the supplied rubber mount.
  11. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  12. GU ute rear rubber mount section may need to be replaced with the supplied rubber mount also.
  13. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  14. Enjoy your IGNITE exhaust!