Playtime/Ignite 3" (76mm) Turbo Back Sports Exhaust System Upgrade

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. Not only are they more durable as well, there's no need for retuning the ECU or a dyno run. They also give a better towing experience.

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. Our systems are CNC mandrel bent, using 3 inch aluminised steel tubing or upgrade to our 409 grade stainless steel options, 10mm thick cut laser plates & EGT Pyrometer fittings to ensure maximum durability, and maximum satisfaction with your upgrade!

Designed for the Isuzu's 3L 4JJ1-TCX 4 cylinder diesel engine.

The exhaust system for the Isuzu RT50 D-MAX (2012 - 2016) are available in these configurations:

  • No Cat / Hotdog Resonator
  • No Cat / Muffler
  • No Cat / Pipe
  • Cat / Hotdog Resonator
  • Cat / Muffler
  • Cat / Pipe

Varies between options.

SKU 3ldmaxignite
Brand Ignite
Shipping Weight 24.0000kg
Shipping Width 0.250m
Shipping Height 0.390m
Shipping Length 1.300m
Shipping Cubic 0.126750000m3

2 Year Warranty.

All of our products are fully backed by Australian manufacturer warranty. 

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

  1. Remove rear tail pipe and muffler assembly from the vehicle.
  2. Remove centre connecting pipe from the vehicle.  
  3. Remove flex join pipe from the vehicle.
  4. Remove turbo dump pipe heat shield.
  5. Remove gear box bracket.
  6. Remove turbo dump pipe. We advise to spray the 2 nuts and 2 bolts with WD40 before removing. Hint: Removing the cat section be a pain, if you wish to not keep the standard exhaust, we advise to cut the bottom flange off the cat section to help with removal. 
  7. Insert the supplied EGT plug into the turbo dump pipe.
  8. Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the four supplied M8x1.25 nuts and two M8x1.25 studs. Tighten all 4 nuts.
  9. Re fit gear box bracket.
  10. Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
  11. Fit the connecting pipe to the flex pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  12. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  13. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  14. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  15. Enjoy your IGNITE exhaust!

Related Products